This machine stirs the main axle by using oil pressure power which torsion is above 5 times than general pellet machines.
The resolver of the vertical type super mixer, which can save 10% than general mixer, may reduce the production cost and increase the economic efficiency.
The vertical type super mixer leaf and chopper both are located at the cover of barrel. The bottom of barrel is big arc shape and there is no dead space in the barrel. And it is designed
in main and vice knife leaves, therefore it won’t have rub overheated of raw material and cause the nature change of the product.
The unity formation of knife leaf plus the special technology design can reach the good mix effect and reduce the air pollution.
This machine meets the CGMP requirements.
Granulation - alcohol
Granulation - acetone
Rotary Granule Sieving Machine
Characteristics:
Dry type: apply to sieve block and mass shape into well mixed grain.
Made of stainless SUS304. Easy to settle and clean. Fitting CGMP norm.
Productivity: 300kg per hour.
Rotating Double-Deck Tablet Pressing Machine
Characteristics:
The whole machine is through treatment of anti-rustiness hard chromium and SUS304#coating. It fits actual requirement of CGMP.
For difficult tabletting products like drugs, health food, aquatic products which including plum cake, fish meal tablet,…etc, this machine may shape it easily and the hardness may reach
15 kg/㎡.
With LCD screen, it appears weight gage and hardness which meet CGMP norm.
Bewise Inc., being a professional manufacturer of various cutting tools, is endeavoring to make
excellent products. We are very experienced in custom-made tools, and good at solving customers’ problems when they meet difficulties and troubles. Through everlasting research and practices, we
understand thoroughly about different materials of cutters and cutting tools.
Apply vacuum melting production to make target compound of CIGS thin film solar cells.
Bewise Inc., being a professional manufacturer of various cutting tools, is endeavoring to make
excellent products. We are very experienced in custom-made tools, and good at solving customers’ problems when they meet difficulties and troubles. Through everlasting research and practices, we
understand thoroughly about different materials of cutters and cutting tools.
High-Entropy alloys is a new design concept of alloy, which use multi major composition instead of traditional single main ingredient. It has large difference than traditional one.
Characteristics：
Easy to produce disordered amorphous phase and nano-precipitates.
Good thermal stability.
Extremely high hardness.
Superior corrosion resistance.
Target material diameter：
3"and 4"
Material
Purity
Ratio
Ti
99.999%
20%
V
99.999%
20%
Cr
99.999%
20%
Zr
99.999%
20%
Al
99.999%
20%
Application：
Good for traditional industries which with huge requirements, endurable mold, 3C electronic mold , and high speed cutting tools.
Bewise Inc., being a professional manufacturer of various cutting tools, is endeavoring to make
excellent products. We are very experienced in custom-made tools, and good at solving customers’ problems when they meet difficulties and troubles. Through everlasting research and practices, we
understand thoroughly about different materials of cutters and cutting tools.
Product：BW High Precision 8 flute T type Single-Angle Chamfering Cutter.
Specification：Custom order according NAS standard.
Characteristics：
Apply to cut aviation difficult material of alloy. For fitting the high accuracy request, the tolerance range for each flute of cutter is as the form below.
Single-Angle Chamfering Cutters / 270.01°
Code
Z
T.I.R.Z
X
T.I.R.X
R
A1
A2
1
158.649
0.028
50.052
0.219
0.214
0.4
40.11
2
158.639
0.028
50.09
0.219
0.201
0.46
39.95
3
158.637
0.028
50.018
0.219
0.228
0.46
40.06
4
158.637
0.028
50.014
0.219
0.221
0.48
40.14
5
158.642
0.028
49.981
0.219
0.216
0.47
40.16
6
158.645
0.028
49.899
0.219
0.21
0.45
40.12
7
158.651
0.028
49.983
0.219
0.206
0.36
40.03
8
158.655
0.028
49.92
0.219
0.224
0.51
40.1
Bewise Inc., being a professional manufacturer of various cutting tools, is endeavoring to make
excellent products. We are very experienced in custom-made tools, and good at solving customers’ problems when they meet difficulties and troubles. Through everlasting research and practices, we
understand thoroughly about different materials of cutters and cutting tools.
Bewise Inc., being a professional manufacturer of various cutting tools, is endeavoring to make
excellent products. We are very experienced in custom-made tools, and good at solving customers’ problems when they meet difficulties and troubles. Through everlasting research and practices, we
understand thoroughly about different materials of cutters and cutting tools.
Shoe mold, usually refers to mould of sports shoes, sandals, slippers, and rubber shoes. Sport shoes is the main among all. Mold made from some processes like injection, extrusion, blow, casting,
forging, smelting, stamping, and other methods to get the request mold and tool. It needs different design of mold because of different material. RB, EVA, TPR, etc. are popular material for
various application. General speaking, shoe mold belongs to injection mold. There are some exceptions, such as CMEVA, which is combined injection and cold press. And some others are made of blow
molding.
